China vinyl ester resin fektheri le bahlahisi |Dujiang

MFE 770 Vinyl Ester Resin Bisphenol A Mofuta oa Epoxy

tlhaloso e khuts'oane:

MFE 700 range, moloko oa 2nd oa MFE, e ikemiselitse ho phahamisa maemo le ho feta.Kaofela ha tsona li ipapisitse le theknoloji e fanang ka khanyetso e phahameng ea mocheso, ho nosetsa hantle le ho sebetsa hantle, sistimi e tloaelehileng ea catalyst.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Thepa & Melemo

• MFE 770 vinyl ester resin ke epoxy novolac-based resin e etselitsoeng ho fana ka thepa e ikhethang ea mocheso le lik'hemik'hale tse hanyetsanang le mocheso o phahameng.E fana ka khanyetso e phahameng ea li-solvents le lik'hemik'hale, ho boloka matla hantle le ho tiea ha mocheso o phahameng, le ho hanyetsa ka mokhoa o babatsehang tikolohong ea acidic oxidizing.
• Thepa ea FRP e hlahisoang ka MFE 770 e boloka matla le ho tiea ha mocheso o phahame.
•MFE 770 ke moloko oa bobeli oa MFE W1 (W2-1) e seng e atlehile ho sebelisoa mesebetsing e boima ea indasteri ka lilemo tse ngata 'me e fana ka mokhoa o mong oa moruo ho li-alloys tse sa tloaelehang ka ho lumella tšebeliso ea FRP ea theko e tlaase ho feta thepa ea khale.

Lisebelisoa

• E loketse lits'ebetso tse joalo ka lits'ebetso tsa FGD, lits'ebetso tsa ho hloekisa litšila tsa indasteri, ho khetha tšepe le lits'ebetso tsa ho ntša solvent tse sebelisoang merafong.
•Ts'ebetso ea ho etsa FRP e kenyelletsang ho bopa ha ho kopana (ho beha letsoho), ho fafatsa, pultrusion, infusion (RTM), joalo-joalo.
• Ho etsoa ha liphahlo tse boima tse thibelang kutu joalo ka likhalase tsa khalase.
•Haeba o hloka ho hanyetsa mocheso o phahameng, ka kopo nahana ka MFE 780(casting HDT 160-166 °C),
MFE 780HT-300 (ho lahlela HDT 175 °C) kapa MFE 780HT-750 (ho lahlela HDT 200-210 °C).

Mekhoa e Tloaelehileng ea Liquid Resin

Thepa⁽¹⁾	Boleng
Viscosity, cps 25 ℃	230-370
Likahare tsa styrene	34-40%
Shelf Life⁽²⁾ Lefifi, 25 ℃	Likhoeli tse 6

(1) Litekanyetso tse tloaelehileng, li ke ke tsa hahoa joalo ka litlhaloso
(2) Moropa o sa buloang o se nang li-additives, bahlahisi, li-accelerator, joalo-joalo.Nako ea bophelo e boletsoeng ho tloha ka letsatsi la tlhahiso.

Thepa e Tloaelehileng (1) Resin Clear Casting (3)

Thepa	Boleng	Mokhoa oa Teko
Tensile Strength/ MPa	75-90
Tensile Modulus/ GPa	3.4-3.8	ASTM D-638
Elongation nakong ea khefu / %	3.0-4.0
Flexural Strength/ MPa	130-145
		ASTM D-790
Flexural Modulus / GPa	3.6-4.1
HDT⁽⁴⁾ / °C	145-150	ASTM D-648 Mokhoa oa A
Barcol thata	40-46	ASTM D2583

(3) Kemiso ea pheko: lihora tse 24 mocheso oa kamore;Lihora tse 2 ka mocheso oa 120°C
(4) Khatello e phahameng ka ho fetisisa: 1.8 MPa

Tlhokomelo ea Tšireletseho le Tšoaro

Resin ena e na le metsoako e ka bang kotsi haeba e sa sebetsoe hantle.Ho ama letlalo le mahlo ho lokela ho qojoa 'me ho lokela ho apesoa lisebelisoa tse hlokahalang tsa tšireletso le liaparo.Litlhaloso ke khatiso ea 2012 'me li ka fetoha ka ntlafatso ea theknoloji.
Sino Polymer Co., Ltd. e boloka Material Safety Data Sheets lihlahisoa tsohle tsa eona.Material Safety Data Sheets e na le tlhahisoleseling ea bophelo bo botle le polokeho bakeng sa nts'etsopele ea hau ea mekhoa e nepahetseng ea ho sebetsana le sehlahisoa ho sireletsa basebetsi le bareki ba hau.Material Safety Data Sheets e lokela ho baloa le ho utloisisoa ke basebetsi bohle ba okametseng le basebetsi pele o sebelisa lihlahisoa tsa rona litsing tsa hau.

Bobolokelo bo khothalelitsoeng:
Meropa - Boloka mocheso o ka tlase ho 25℃.Bophelo ba polokelo bo fokotseha ha mocheso oa polokelo o ntse o eketseha.Qoba ho pepesehela mehloli ea mocheso joalo ka mahlaseli a letsatsi kapa liphaephe tsa mouoane.Ho qoba tšilafalo ea sehlahisoa ka metsi, u se ke ua boloka ka ntle.
Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock. For more information, please contact us at sale1@frp-cqdj.com